1. Help Center
  2. App & Smart tech

How do I reset the "replace filter" notification in the Aquablu App

The replace filter notification is based on a liter counter which can be reset by pressing the black reset button three times during production.

To ensure the mineral cartridge is replaced in the proper interval, both the Aquablu One and Aquablu Pro contain a "mineral counter". This counter checks when you need to replace your mineral cartridge. 

Aquablu One

- The mineral counter will count down from 9000L to 0. If the counter goes below 100 liters, the "replace filter" sign will occur. More information on how to replace the mineral cartridge can be found in this article. 

How to reset the mineral counter for Aquablu One:

1. Open the tap to ensure the system is in production mode

2. Press the reset button at the back of the machine three times in a row (within 2 seconds)

3. Close the faucet. 

By closing the faucet, the system saves your action. You can scan the system and see the sign has been removed. 

 

Aquablu Pro

- The mineral counter will count down from 90.000L to 0. The counter for the Pro can be used to set replacement/service intervals. We have set one cycle to 90.000 L as this is our recommended maximum service cycle. 

How to reset the mineral counter for Aquablu Pro:

1. Open the faucet/tank to ensure the system is in production mode

2. Press the reset button at the back of the machine three times in a row (within 2 seconds)

3. Close the faucet/tank outlet


By closing the faucet/tank outlet, the system saves your action. You can scan the system and see the sign has been removed.